Відео

@@deequsan7491 if you leave it stock the diff housing is ok. More power and you need the aluminum. In my later video I did put aluminum on

@@keyriekalyan9273 if it's not starting you probably live in a higher elevation or hot Temp. They are set rich from the factory for break in sea level 70 degrees. Sounds like you need to lean the mixture screws

Yes if I did say that I apologize. Its acually VP brand.

@@GussCustomCreations not a problem !!!! Just love amsoil and thought I was missing out on amsoil nitro fuel. We should tell them to make some LOL

@@jasongebhardt9194 yeah pretty good for a stock 3s rig

6s

$450

07789 07778 07782 07773 07780 07159 07403 07146 07781 07786 07776 all purchased from Redcatracing.com

Yeah it will wheelie. I was keeping the front end down so I didn't ruin the body. Going to make a wheelie bar of some sort unless they make one

www.ddmracing.com/DDM-Dominator-Black-Pipe-for-Redcat-Rampage-HPI-Maverick-Blackout-DDM009-Black

The truck worked perfectly fine for 2 years and about 4 gallons of gas. The only thing I don't like about it is its break system is not the best as most 1/5th scale have 2 brakes this only has one. And the other was the throttle linkage, its flimsy and will warp and cause the engine to rev slightly when you hit the breaks. The other issues were pretty typical for a gas rig mainly screws vibrating out, but I have yet to break a single part. The reason for converting it to electric is I like it so much I wanted one of each and I like to build stuff lol. I'm in the process of grabbing another one and will be putting a bigger engine in it with the buggy gear ratio.

I don't make them really I typically convert them to be able to use a different gear or modify the gear. What gears do you need?

@@GussCustomCreations spur gear 50-84 pinions 17-40

No that's the stock engine.

@@GussCustomCreations do u mind me asking how it works if u need to bolt it on but stock is just coupler to muffler to exhaust with 2 clamps

Thanks 👍🙏

Yes sir you just can't beat the price for what you get. 👍💯

Couldn't agree more!

RIP is known to most hobbyists as a term for testing, or taking it for a drive. If you looked at the thumbnail it clearly says TEST. Its pretty obvious you are ignorant to a lot of things RC and Internet based so I would keep your comments to yourself. You didn't even look in the link in the description where I have the parts listed. I do this for fun, and apparently you take things way to seriously and need to go get some help. I'll pray for you.

Thanks 😄

They are 4x4 Traxxas Stampede tires. I got them off of Amainhobbies. Make sure they are for the 4x4 as they are different to the 2x4 so the rims don't fit.

You're welcome and hope you enjoy it as much as I do

I converted a wendigo into a monster truck. The chassis is from a axial. I made this before the LMT came out as there was nothing besides the axial

@GussCustomCreations Bravo,sir, well done .... thx for the reply. High from Orygun!!

The Traxxas fuel is fine. I have run it for years in the Traxxas I have. A lot of the brands are actually made by the same company so they are comparable.

This is the 900 one but yes it was worth it. It's not perfect but worth the money

@@GussCustomCreations yeah my bad i noticed that after my post.. i have nitro and electric rc's but never had gas.. amazon has the cheaper one for a good price right now so i went for it. hearing you like it helped.. i didnt want something that would break in 5 min. thanks what on your broke first?

@@carstoniu I haven't really broken anything. Some screws came loose but that's it

Yep the stock pinion

@@GussCustomCreations ok 👍🏻

Amsoil 30%

It's not too rich the carb on these sucks and don't hold tune. The revving is the crappy throttle linkage that bends when you hit the brakes and lightly applies throttle. I'm guessing you watched the first 3 minutes before I tuned it and didn't actually watch the video so you didn't see

The new Kaiju is better. It comes with a steel spur. The spur is all I ever ruined on it.

It's a blast to drive for sure 😊

Thanks, it rips pretty good!

It's a proline body for an xmaxx. Just have to put in a couple holes

I think so. Mine has been pretty reliable and it's a blast to drive.

If you check out the playlist on my channel I have a dozen maybe video and the description has the mod links.

Thanks much appreciated 👍

Thanks man 👍. After I beef the diffs I may swap the mount and go 12s.

I might grab a 2spd or 3spd. Just haven't yet.

@@GussCustomCreations I was thinking on that as well but I´m not sure if it works properly

@@Fernandes352 yeah I have heard it's hard to tune the clutch shift points and if you are running higher HP it won't hold up to much more than stock power.

You're welcome. Thanks for watching 🙏

they make one now specifically for the 2.0 I would recommend that one as it bolts right in

@@GussCustomCreationsthe only thing is they have this one for $99 lol instead of $249 for the bartolone

@@_beastmode_rc You have a good point and that is why I got it myself. I had to modify and reweld the brackets and then everything cleared. It will still heat the cage enough to make it soft and move the light wires lol. i learned the hard way.

I feel the same. One of my favorites.

Yeah it's close to an Xmaxx. It's wider but the wheelbase is about the same so it's just a touch bigger.

thanks I appreciate it

Yes sir. I have another cool project in the works

When the wallet is heavier, the new Max 5 and 800 are going in 👍💯

@@GussCustomCreations that darn wallet always ruining the fun

Thanks, much appreciated!

Pretty much lol

🧔‍♂🧔‍♂🧔‍♂🖕💪💯

rovanrc.com/product/RV305A/

It's a ton of fun

Yeah if they are ec5 or ic5. They have to be pretty small 3s to get 2 to fit without lifting the body

Thanks for quick reply. They are pretty skinny. Overlander 55c 4500mah 3s. Do you they think they will fit? As I have a chance to sell them but rather keep them if I could.

@@amirulandsally12 should be close but I think it should work